PP75A single pole connector

PP75 series Powerpole® housings can be used

PP75 series Powerpole® housings can be used for wire-to-wire,
wire-to-board, and wire-to-busbar applications. Wire sizes
from #16 AWG (1.3 mm²) to #6 (13.3 mm²) offer power
capabilities up to 120 amps per pole. Locking housings offer
the capability to secure Powerpole® housings to each other
and to mounting pads. Housings made from chemical
resistant (CR) resin withstand industrial solvents better than
standard housings.
• Large Wire Range Accommodates up to #6 (10mm²) Wire
Reducing bushings allow as small as #16 (1.5 mm²) wire to be used
• Wire, PCB, and Busbar Contacts
Allows one connection system to meet multiple needs
• Mini-Powerclaw PCB Contacts Minimize PCB Footprint
Removes the PP75 housing from the board side

PP75 Standard Housings
The second smallest Powerpole® housing can be used with wire contacts
for up to 6 AWG [10mm²] as well as PCB and busbar contacts.
Description ------- Part Numbers --------
Minimum Quantity ... 1,000 100 ......
Red 5916G7-BK 5916G7
Green 5916G6-BK 5916G6
Black 5916G4-BK 5916G4
White 5916G5-BK 5916G5
Blue 5916-BK 5916
Yellow 5916G15-BK 5916G15
Orange 5916G14-BK 5916G14
Gray 5916G16-BK 5916G16

Has the same form and dimensions of the standard
PP75 housing in a chemical resistant PBT/ PC blend
housing. Suitable for use to -40°C.
Description - Part Numbers -
Minimum Quantity ... 1,000 .......
Red P5916G7-BK
Black P5916G4-BK
White P5916G5-BK
Blue P5916-BK

PP75 Locking Dovetail Housings
Offers dovetails for stacking housings that have a locking feature to prevent housings separating.
Can mate to standard and chemical resistant housings, but cannot be stacked with them.
Description ---------- Part Numbers -----------
Minimum Quantity .... 1,000 100 .....
Red 75LOKRED-BK 75LOKRED
Green 75LOKGRN-BK 75LOKGRN
Black 75LOKBLK-BK 75LOKBLK
White 75LOKWHT-BK 75LOKWHT
Blue 75LOKBLU-BK 75LOKBLU
Gray 75LOKGRA-BK 75LOKGRA

PP75 Silver Plated Wire Contacts
Silver plated contacts offer the best electrical performance and durability up to 10,000 mating cycles.
See reducing bushings in accessory section for smaller wires.
Dimensions
Mating Loose Piece - A -
AWG mm² Force -- Part Numbers -- inches mm
Minimum Quantity ........................ 1,000 100 ........................
6 13.3 Low 1307-BK 1307 0.22 5.59
6 13.3 High 5900-BK 5900 0.22 5.59
8 8.4 High 5952-BK 5952 0.19 4.83
12 to 10 3.3 to 5.3 Low 5953-BK 5953 0.14 3.56
12 to 10 3.3 to 5.3 High 5915-BK 5915 0.14 3.56
PP75 Silver Plated Busbar Contacts
Provide a quick disconnect input or output busbar connection. Busbar contacts are
for mating with wire contacts only. Part number 75BBS includes lock nuts. Locknuts
must be ordered separately for B01956P4.
Mating
Type Thread Force ------------- Part Numbers --------------
Minimum Quantity ................. 1,000 20 10 ...
Busbar #10-24 High B01915P1 - 75BBS
Lock Nut #10-24 - H1216P8 110G54 -